Q-Logic SANbox2-8c Manuel d'utilisateur Page 104
- Page / 148
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
B – Command Line Interface
Set Setup Command
B-36 59042-00 A
Examples The following is an example of the Set Setup SNMP command:
SANbox2 $> admin start
SANbox2 (admin) #> set setup snmp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the default value.
If you wish to terminate this process before reaching the end of the list
press ’q’ or ’Q’ and the ENTER key to do so.
Trap Severity Options
---------------------
unknown, emergency, alert, critical, error, warning, notify, info, debug
Contact (string, max=32 chars) [Technical Support]
Location (string, max=32 chars) [TSLab ]
Trap1Enabled (True / False) [True ]
Trap1Address (dot-notated IP Address) [10.20.71.15 ]
Trap1Port (decimal value) [162 ]
Trap1Severity (see allowed options above) [warning ]
Trap2Enabled (True / False) [False ]
Trap2Address (dot-notated IP Address) [0.0.0.0 ]
Trap2Port (decimal value) [162 ]
Trap2Severity (see allowed options above) [warning ]
Trap3Enabled (True / False) [False ]
Trap3Address (dot-notated IP Address) [0.0.0.0 ]
Trap3Port (decimal value) [162 ]
Trap3Severity (see allowed options above) [warning ]
Trap4Enabled (True / False) [False ]
Trap4Address (dot-notated IP Address) [0.0.0.0 ]
Trap4Port (decimal value) [162 ]
Trap4Severity (see allowed options above) [warning ]
Trap5Enabled (True / False) [False ]
Trap5Address (dot-notated IP Address) [0.0.0.0 ]
Trap5Port (decimal value) [162 ]
Trap5Severity (see allowed options above) [warning ]
ReadCommunity (string, max=32 chars) [public ]
WriteCommunity (string, max=32 chars) [private ]
TrapCommunity (string, max=32 chars) [public ]
AuthFailureTrap (True / False) [False ]
Do you want to save and activate this snmp setup? (y/n)
- Installation Guide 1
- Document Revision History 2
- Table of Contents 3
- Section 3 Planning 4
- Section 4 Installation 4
- Appendix A Specifications 5
- 59042-00 A Page vii 7
- Page viii 59042-00 A 8
- Introduction 9
- Related Materials 10
- Safety Notices 11
- Sicherheitshinweise 11
- 1 – Introduction 12
- Communications Statements 12
- 1-4 59042-00 A 12
- CE Statement 13
- VCCI Class A Statement 14
- BSMI Class A Statement 14
- Laser Safety Information 15
- Accessible Parts 15
- Pièces Accessibles 15
- Zugängliche Teile 15
- Technical Support 16
- Availability 16
- Training 16
- Contact Information 16
- General Description 17
- Chassis Controls and LEDs 18
- Reset/Force PROM Button 18
- Resetting a Switch 19
- Over Temperature LED (Yellow) 19
- Fan Fail LED (Yellow) 19
- Heartbeat LED (Yellow) 20
- Input Power LED (Green) 20
- Fibre Channel Ports 20
- Port Modes 21
- Fabric Ports 21
- Expansion Port 21
- Translated Loop Port 22
- Logged-In LED 22
- Activity LED 23
- Ethernet Port 23
- Serial Port 24
- Power Supply and Fan 25
- Switch Management 25
- 2 – General Description 26
- 2-10 59042-00 A 26
- Planning 27
- Multiple Chassis Fabrics 28
- Common Topologies 29
- Cascade Topology 29
- Mesh Topology 30
- Multistage Topology 31
- Distance 32
- Performance 32
- Bandwidth 33
- Device Access 34
- Soft Zones 35
- Fabric Management 36
- Fabric Security 36
- Installation 37
- Environmental Conditions 38
- Installing a Switch 38
- Mount the Switch 39
- Install SFP Transceivers 40
- 4 – Installation 41
- 59042-00 A 4-5 41
- 4-6 59042-00 A 42
- Install SANbox Manager 43
- 4-8 59042-00 A 44
- 59042-00 A 4-9 45
- Ethernet Connection 47
- Serial Connection 47
- Set the Date 48
- Configure the Switch 49
- Configure the Ports 50
- Cable Devices to the Switch 50
- Loading Firmware 50
- 59042-00 A 4-15 51
- 4-16 59042-00 A 52
- 59042-00 A 4-17 53
- 4-18 59042-00 A 54
- Diagnostics/Troubleshooting 55
- Force PROM Mode Pattern 56
- Fatal Error Blink Pattern 56
- Logged-In LED Indications 57
- Chassis Diagnostics 59
- Fan Fail LED is Illuminated 60
- Recovering a Switch 60
- 59042-00 A 5-7 61
- 5-8 59042-00 A 62
- Specifications 63
- Switch Maintainability 64
- Switch Dimensions 65
- Switch Electrical 65
- Switch Environmental 65
- A – Specifications 66
- A-4 59042-00 A 66
- 59042-00 A A-5 67
- A-6 59042-00 A 68
- Command Line Interface 69
- Command Syntax 70
- Commands 71
- Admin Command 72
- Alias Command 73
- B-6 59042-00 A 74
- Config Command 75
- B-8 59042-00 A 76
- SANbox2 $> date 77
- Tue Jun 12 07:51:24 2001 77
- SANbox2 $> admin start 78
- SANbox2 $> admin end 78
- SANbox2 $> 78
- Help Command 79
- History Command 80
- Image Command 81
- SANbox2 (admin) #> lip 2 82
- Passwd Command 83
- Ps Command 84
- Quit Command 85
- Reset Command 86
- SANbox2 $> set alarm clear 90
- SANbox2 $> set beacon on 91
- Command succeeded 91
- SANbox2 $> set beacon off 91
- Set Config Command 92
- B-28 59042-00 A 96
- 59042-00 A B-29 97
- 59042-00 A B-31 99
- B – Command Line Interface 100
- Set Log Command 100
- B-32 59042-00 A 100
- Set Port Command 101
- Set Setup Command 102
- B-36 59042-00 A 104
- 59042-00 A B-37 105
- Set Switch Command 106
- Show Command 107
- 59042-00 A B-43 111
- B-44 59042-00 A 112
- 59042-00 A B-45 113
- B-46 59042-00 A 114
- 59042-00 A B-47 115
- Show Config Command 116
- 59042-00 A B-49 117
- SANbox2 $> show log level 118
- Show Log Command 119
- 59042-00 A B-51 119
- Show Perf Command 120
- Show Setup Command 121
- B-54 59042-00 A 122
- Shutdown Command 123
- Test Command 124
- 59042-00 A B-57 125
- SANbox2 $> uptime 126
- User Command 127
- B-60 59042-00 A 128
- SANbox2 $> whoami 129
- User name:admin@session2 129
- Switch name:SANbox2 129
- Switch domain ID:1 129
- Zone Command 130
- ■ Alias name 131
- B-64 59042-00 A 132
- Zoneset Command 133
- B-66 59042-00 A 134
- Zoning Command 135
- B-68 59042-00 A 136
- 59042-00 A B-69 137
- B-70 59042-00 A 138
- Glossary 139
- Glossary-2 59042-00 A 140
- 59042-00 A Glossary-3 141
- Glossary-4 59042-00 A 142
- 59042-00 A Index-1 143
- Index-2 59042-00 A 144
- 59042-00 A Index-3 145
- Index-4 59042-00 A 146
- 59042-00 A Index-5 147
- Index-6 59042-00 A 148
Produits connexes et manuels pour Commutateurs de réseau Q-Logic SANbox2-8c
(138 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.100 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels