Q-Logic 64 Manuel d'utilisateur télécharger pdf (Page 37)

2 – General Description

Serial Port

59043-03 A 2-11

Figure 2-8. Serial Port and Pin Identification

The serial port connector requires a null-modem F/F DB9 cable. The pins on the

switch RS-232 connector are shown in Figure 2-8 and identified in Table 2-1.

Refer to ”Connect the Management Workstation to the Switch” on page 4-9 for

information about connecting the management workstation through the serial port.

Table 2-1. Serial Port Pin Identification

Pin Number Description

1 Carrier Detect (DCD)

2 Receive Data (RxD)

3 Transmit Data (TxD)

4 Data Terminal Ready (DTR)

5 Signal Ground (GND)

6 Data Set Ready (DSR)

7 Request to Send (RTS)

8 Clear to Send (CTS)

9 Ring Indicator (RI)

Serial Port

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 243 244

Pas de commentaire

Q-Logic 64 Manuel d'utilisateur Page 37